Rockville Auto Repair

See if any of these are happening to your vehicle.  You feel it vibrating excessively underneath when it’s running, or you hear strange clunking, grating, or grinding sounds coming from beneath.  Maybe it’s hard to turn your vehicle, or you can hear squeaking when you’re going slow.  Perhaps you feel a shudder when you step on the throttle.   Any of those could be signs that your vehicle’s driveshaft might need lubricating, and it’s important to have one of our technicians check it out. Your vehicle’s engine puts out a lot of twisting power.  That force is called torque, and the driveshaft is the part that handles the job of transferring all that torque from your engine to the wheels.  If it’s a four-wheel or all-wheel drive vehicle, it will have driveshafts front and rear.  Some driveshafts have different segments which are connected by couplings called U-Joints.   So that everything can glide along fine ... read more

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces. As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer.  There are signs you can look ... read more

There's something you can do that helps your tires last longer, wear more evenly and your vehicle handle better.  "Sign me up," you say! Wondering what that is? It's aligning your wheels, and it will literally point you in the right direction when it comes to a better and safer driving experience. When your vehicle was designed, the engineers made sure your tires were all pointing the same way by designing the suspension to make optimal contact with the road. That way the ride is smooth, you don't feel vibrations or shimmying and your vehicle travels in a straight line, without pulling to one side or the other. Unfortunately, your vehicle is not brand new; time and distance take their toll.  After hitting countless bumps, potholes, or the occasional curb, your suspension gets knocked a little out of kilter.  Those precise angles the engineers planned on for your vehicle? They get out of whack Uneven or premature tire wear is one of the first signs your alignment may be o ... read more

You may have heard about an important part of your vehicle's engine called a timing belt, and many know that if that belt breaks, it can cause some very serious engine problems.   Not all vehicles have them, and the ones that do generally have smaller engines.  The timing belt keeps the engine synchronized so that every time a spark plug fires, the crankshaft, camshaft, pistons, and valves are all working together.  Timing belts will eventually have to be replaced, and most vehicle manufacturers recommend when that should be.  Typically, it's around every 60,000-100,000 miles, or 100,000-160,000 km. It's a good idea to stick to your vehicle's schedule or be alert for signs that the timing belt may be failing prematurely. Some of those symptoms? Maybe your engine won't even turn over when you try firing it up. You might hear a ticking or banging sound under the hood.  Perhaps you spot an oil leak or notice the engine misfiring.  If any of those are happenin ... read more

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.   Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen? One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go. Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not ... read more

Tires are so reliable these days that few drivers pay much attention to them.  But tires wear out.  They have a tough job since they are the only point of contact between your vehicle and the road.  They have to get your vehicle going from a stop, keep it going, make sure it is headed in the direction you want it to go, and –importantly – slow and stop it.   The only time many drivers think about their tires is when there's a problem, such as a flat.  Or, they may lose control when they find their vehicle isn't stopping or steering like it used to.  One major safety organization estimates that 1 out of every 11 crashes is related to a tire issue.   Many of those problems are caused by tire tread wearing out.  The rubber is worn off by friction after hours and hours on roads.  The sidewalls can also be damaged by your tires hitting curbs, potholes, or other debris. Plus, rubber ages as time passes.  We recommend you let us in ... read more

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm. Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment.  The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber b ... read more

If you own a newer vehicle, your vehicle’s manufacturer may require that it use synthetic oil instead of conventional oil.  Synthetic oils are more stable, don’t break down as easily, and provide better engine protection than conventional oil. All those things can prolong the life of your engine and help it run better. Imagine the damage that could happen to your engine as it operates at high speeds and very hot temperatures.  Oil reduces the friction between the metal parts.  That’s why it’s important that it maintains its lubricating properties for a long time, which synthetic oil does better than conventional oil.   Clean oil is better than dirty oil because it has fewer impurities.  Synthetic oil is purer because of how it’s formulated and manufactured.  Plus, as the outside temperatures change, the ability of oil to operate in those conditions is important.  
For example, the colder it gets, it’s important f
... read more

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.   If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The bi

... read more

Think of how many times you put your foot on your vehicle’s brake pedal every day.  And think of how much you rely on your brakes to slow down and stop your momentum.  When it comes to safety systems, your brakes are at the top of the list, and that’s why it’s so important to keep them in top condition. Brakes are something you make sure you keep maintained before they start showing signs of problems. Some of those signs are a grinding sound when you step on the brake pedal, your vehicle pulling to one side when you brake, you don’t feel your brakes stopping you as quickly as they used to, or you notice the brake light is illuminated on your instrument panel.  We ask a lot of our brakes.  They have to work no matter how hot or cold it is outside.  That means whether it’s sunny, snowing, raining, or icy; you’re traveling at highway speeds or school-zone speeds; or when suddenly you find yourself trying to avoid hitting another ... read more