Rockville Auto Repair

You're heading down the road and you notice your vehicle is sputtering, like it's running out of gas.  But the gauge show's it's still got a quarter of a tank.  So what gives? It could be that your fuel pump is failing, meaning your engine is not getting enough gas to run properly.  While fuel pumps are built to last a long time, sometimes they fail.  Other symptoms you may have a bad fuel pump include your vehicle stalling and then refusing to start again, the engine overheating or a hum or whirr coming from around the gas tank.  Or, your Check Engine light may come on. Most fuel pumps are in the gas tank. They have a small electric motor in them.   When you bring your vehicle to our service center, a technician will run tests to confirm the fuel pump is getting power to it but has failed.  Some vehicles have an access panel so the fuel pump can be removed and replaced.  But in some vehicles that don't have that access panel, the technician ... read more

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking.  Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down. The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always. Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the sur ... read more

When it comes to oil changes, things are really changing.  Most newer vehicles require synthetic oil, and while it costs more than conventional oil, it doesn't need to be changed as often. When conventional oil was the only game in town, you changed your oil every 3,000 miles/5,000 km. But as technology in newer vehicles has rapidly changed, so has oil technology.  Synthetics have been around since the seventies.  Even though they start with a conventional oil base, they are engineered in a chemical processing plant with properties that allow them to keep your engine lubricated at very high temperatures.  They are more uniform and consistent. Synthetic oil doesn't break down as easily, so it lasts longer than conventional oil.  And synthetic oil can flow more easily, even in extremely low temperatures.  As you can see, it has performance advantages at both temperature extremes. Generally, in recent years automakers have been shipping most of their vehicles ... read more

Maybe you've been cooped up for a while and are yearning for a change of scenery.  Or maybe you need to visit a relative who lives far away.  You choose not to fork out the big bucks for airline tickets, so it's time for a road trip.  Make sure you're road ready by having your vehicle professionally inspected before the big drive. One of our technicians can check out several of your vehicle's most important systems so you can be more confident that you'll be able to go the distance without a breakdown.  Here are a few things a trip inspection may include: Your vehicle stops with brakes that, in turn, stop the tires.  They must both be in sound condition. The technician can look at your tire tread, the condition of the sidewalls, and note the tires' age.  Brakes have pads and rotors that should meet certain specs, so an expert inspection of their condition is important, too. A technician can check other vital fluids such as engine coolant, power steering, t ... read more

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint. One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time. Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly. Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintena ... read more

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes.  The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle. Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 &ldqu ... read more

Changing your oil regularly is one of the most important things you can do to keep your vehicle running well.  And knowing the right type of oil to use is also very important.  Engine oil is classified by weight, but it doesn't refer to how much the oil would weigh if you put it on a scale.  It refers to viscosity, or how easily the oil flows through the engine.  Most engines operate normally at around 210°F/99°C.  The viscosity, or weight, is assigned a number by how well it flows at that temperature.  The lower the number, the more freely it flows.  Most vehicle engines use what's called a multigrade oil which behaves differently in different temperatures. Multigrade oils have a "W" in their viscosity number that you may have seen on a bottle of oil, something like 5W30.  The W stands for winter and shows how freely it flows in colder temperatures. That means a 5W30 oil will behave like a 5 weight oil in lower temperatures (less viscous ... read more

You are heading down a flat, newly paved street when all of a sudden you feel it.  Your vehicle jumps a little bit when you're accelerating and changing gears.  You know it's not the surface of the road because it's smooth as silk.  So what did you just feel? That kind of jumping—or grinding or slipping—during gear changes could be a sign of trouble in your automatic transmission.  And it's important to get it checked out fairly soon because some transmission problems that aren't fixed early can lead to more involved and expensive repairs. By far most vehicles on the road in North America have automatic transmissions, and they are workhorses.  Unlike early cars with balky, hard-to-shift manual transmissions, the latest automatics allow you to drive without having to even think about gear changes.  But you should know about a few signs of trouble to look for if they ever start showing up. When you first get going and shift your vehicle from Par ... read more

Warm weather can bring severe storms, and when the rain is coming down hard, that's one time you really need to be able to see as clearly as possible out your windshield.  Having wiper blades that are fit for the job are important to maintain that safe view. Maybe you live in a climate where you use blades made for winter weather and you have haven't changed them since the weather changed.  Those blades are made of heavier materials and don't work as well in warmer temperatures. Blades made for warm temperatures are lighter and clear water better in the warmer months. The general rule of thumb is you should change your blades every six months, but if you use them a lot, you might have to change them more often.  A couple of signs that your blades need changing? If you are seeing streaks on the glass or hearing a chattering sound when your wipers are working, time for a new pair. Wiper blades have cleaning windshields on vehicles for more than 100 years.  The origina ... read more

Most of us look forward to spring because the days are longer, the weather's warmer and we can finally get our vehicles into warm weather mode.  Here are a few things that will breathe fresh energy into anyone's car, SUV, truck or van. First thing is a good cleaning, especially underneath. If you live where salt and brine are used on the roads, it's important to get that off.  One thing to note… if you hose off your undercarriage, be careful not to get your spark plugs/wires wet.  You could notice your vehicle running rough plus the Check Engine light may come on. It usually dries out quickly, but if the engine light stays on for more than a couple of days, have your service facility check it out. Next, replace your windshield wipers.  They've taken a beating through the winter. New ones will have fresh rubber and you'll see clearly (and safely) out your windshield again. Have your brakes inspected.  That salt doesn't do your brake's metal components any ... read more