Posted on 5/26/2024
For most drivers, at some point you’re going to have a flat tire. Depending on how it was damaged, it may have to be replaced. But sometimes, a repair will do the trick, as long as the puncture isn’t on the sidewall and the hole is smaller than ¼ inch/6.35mm in diameter. Here are the three common ways your tire can be fixed. One way is to put a plug in the hole. Since most tires are damaged by running over sharp objects such as screws and nails, the small hole from which the air is escaping is on the part of the tire that touches the road. If it’s in the sidewall, it most likely can’t be fixed. In the plug method, a technician inserets a rubber plug. It is covered with some sticky, gluey stuff, and is pushed into the hole from the outside. That plugs the hole and stays in place, thanks to the glue. Friction from driving heats it up and seals the deal. Another method is to patch the hole. For this, your tire has to fir ... read more
Posted on 5/19/2024
As your vehicle ages, its performance isn’t quite what it used to be, but many of us never notice the change because it’s gradual. So here are a few questions to ask yourself. Does your vehicle feel like it doesn’t have the pep that it used to? Have you noticed your fuel economy isn’t quite as good as it once was? Does it idle roughly or is it hard to start? Do you hear the engine knocking? Has it recently failed an emissions test? All of those can be signs that your fuel and air induction systems are dirty and need cleaning. Your fuel system takes gasoline from the tank to the engine’s combustion chambers where fuel injectors spray fuel that mixes with air and is ignited by spark plugs. Black carbon deposits eventually can build up, obstructing fuel flow and diminishing your engine’s performance and fuel efficiency. The air induction system is what allows air to go into the engine’s combustion chamber. Getti ... read more
Posted on 5/12/2024
Your vehicle’s engine runs hot. It should, since it’s a series of little explosions that create the power that gets you going where you want to go. To keep the engine cool, engineers have designed wonderful cooling systems that use liquid coolant, hoses, and a radiator to transfer the heat from the engine to the outside air. In order for the system to work right, it has to have the right amount of that liquid coolant in it. So that you know when the coolant has dipped below the correct amount, there is a sensor that keeps an eye on it. When the coolant gets low, that sensor lights up a signal on the dash to alert you. It may literally say “Check Coolant” or it may have a picture that looks like an old-style bulb thermometer sitting in liquid. Your owner’s manual will usually tell you exactly what the one in your vehicle looks like. If that sensor system isn’t working right, you could wind up driving for a lo ... read more
Posted on 5/5/2024
It’s important for safe driving that two of the most important systems in your vehicle work right. One is the brakes. The other is the steering. Nearly all vehicles on the road have some sort of power steering that allows you to direct a very heavy machine with little effort. There are two types, hydraulic and electric. Many newer vehicles have electric power steering that uses an electric motor to make your steering easier. But there are many vehicles on the road that use a system that has been around for years. It uses a power steering pump, a cylinder, several valves, and hydraulic fluid to make it easy for you to turn the wheel. If you have hydraulic power steering in your vehicle, it’s important to change your power steering fluid every once in a while. Over time, the fluid gets contaminated with dirt and other particles. You might notice your steering is loose, maybe harder to turn and makes a low, strainin ... read more